Wastewater Evaporator Water Eater Model 85E Electric 5 GPH Boil Waste Water

This is a Wastewater Evaporator Water Eater in excellent condition.

• Model # 85E
• 220 Volts
• 40 Amps
• Three Phase

The Water Eater Model 85E is an electrically heated wastewater evaporator designed for the small to medium sized generator of wastewater. It comes in two models, the Model 85E Carbon Steel version and the Model 85E-SS 316L Stainless Steel version (tank, floor, lid, covers, and stack are 316L SS). Installation is easy consisting of only an electrical hookup and a 6" diameter vent stack. The unit can be filled three different ways: (1) Using the supplied 2" coupling on the top of the unit; (2) Remove the lid and manually pour in fluid; or (3) Using the optional 70 GPM self priming fill pump. After an initial heat up time of approximately one hour, the Model 85E will evaporate 5 gallons per hour of water. The Model 85E will automatically shut itself down via a low level control. A secondary high temperature shutoff is also provided. When a cycle is completed the waste material can either be drained via a 2" drain opening, vacuumed out of the unit through the removable lid, with a wet/dry vacuum or pump, or, if it is a solid material, scooped out. To facilitate cleanout, the interior tank of the 85E water evaporator has no obstructions (such as heating elements or stationary float mechanisms) impeding cleanout.

EVAPORATION RATE

5 Gallons / Hour

TANK CAPACITY

85 Gallons (322 Liters)

TANK CONSTRUCTION

12 Gauge Tank w/ 1" Insulation;

16 Gauge Painted Exterior

TANK FLOOR

3/8" Steel Plate (Carbon or 316L SS)

TANK HEIGHT

30"

SKIMMER

Adjustable Weir Ball Valve

TANK FILL PORT

2" NPT Coupling

HEATING SYSTEM

Electric, Through Floor Heat Exchanger,

11,400 Watts

DIMENSIONS

(FLOOR SPACE)

41"L x 23"W x 46" H

41"L x 31"W x 46" H (with Pump or AFS)

UTILITY REQUIREMENTS

240 Volts/3 Phase/40 Amps

(Field Convertible to 240V/1/50A);

Optional 480Volts/3 Phase/ 20 Amps

DRAIN

Flat, Obstruction Free Floor;

2" Stepdown Drain with Plug

VENT STACK

6" Diameter

SHIPPING WEIGHT

450 Lbs.

PTWS - 08082023--LR-07

Picture# 07282023

* All information deemed accurate but may vary from model to model.

Contact Larry for any questions please call Four Zero One - Nine Six Five - Five Five Five Seven

___________________________________________________

Equipment Financing Available, please contact us!

Fast Application, it’s all filled in for you...

Online leasing applications (get LOW monthly payments)

* Please Note: Not all machines may qualify for Leasing.

Payments: We accept all Major Credit Cards, Bank Wires, Company and Personal Checks.

SHIPPING: Contact us for great rates on shipping...

We always get better rates...

Please email us for a rigging and shipping quote; just include the zip code when inquiring and if you have a loading dock or ground level with forklift. Thank you!

Contact us at Four Zero One - Nine Six Five - Five Five Five Seven

We also ship worldwide.

CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping dates are only approximate and contingent upon delays beyond our control. All orders received are binding only when they have been accepted and acknowledged by us in writing. Provisions in customer’s purchase orders contrary to these conditions shall not be binding upon us unless accepted in writing. Unless otherwise specified, prices quoted are F.O.B. shipping point, exclusive of State, County and Federal taxes which must be added where applicable. Insurance on shipment must be requested by email, there will be an additional charge for shipping insurance. Shipping destination must be available to receive the shipment… any costs incurred on delays due to the buyers’ destination being unable to receive the shipment and/or additional services required, will be the responsibility of the buyer. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. All used equipment is sold "as is".

INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user's responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. User agrees to indemnify and hold Seller harmless of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agent to follow instructions, warnings, or recommendations furnished by manufacturer, or Seller, or by failure of user to comply with Federal, State and Local laws applicable to such equipment including the Occupational Safety and Health Act of 1970. User shall notify Seller promptly after occurrence of any accident involving these machines and shall cooperate fully with Seller. or Seller's agent in investigating and determining the cause of said accident.