Tsugami CNC Swiss Type Lathe NP 32 Fanuc Control with Bar Feed Mist Control & Chip Conveyor

This is a Tsugami CNC Swiss Type Lathe NP 32 Fanuc Control with Bar Feed Mist Control & Chip Conveyor in excellent condition.

TSUGAMI NP32 MKIII SWISS-TYPE LATHE 

• Type: NP 32
• No. 9560
• 230 Volt
• 8.7 Amps
• 50/60 Hz
• 3 Phase

STOCK DIAMETERS: 0.315" TO 1.26"

MAXIMUM LENGTH: 8.3" (ONE SLIDE STROKE)

MAXIMUM HOLE DIAMETER: 3/4" DIA. DRILL (SUS304)

MAXIMUM THREAD SIZE: 1/2" TAP (SUS304)

X1 SLIDE TRAVEL (FRONT SLIDE): 3.35"

X2 SLIDE TRAVEL (REAR SLIDE): 4.53"

Z1 SLIDE TRAVEL (HEADSTOCK): 8.47"

Z2 SLIDE TRAVEL (SUB-SPINDLE): 8.47"

CROSS SLIDE (SUB-SPINDLE): 6.02"

MAIN SPINDLE SPEED: 35 TO 6000 RPM

MAIN SPINDLE MINIMUM INDEXING ANGLE: 0.001 DEGREES

SPINDLE MOTOR: 7.5/10HP

NUMBER OF TURRETS: 2

NUMBER OF MOUNTING STATIONS: 16

TURNING TOOL SIZES: 5/8" X 5/8" X 3.15"

DRILL HOLDER SIZE: 1"

ROTARY TOOL SPEED MAX: 4750 RPM

MAX CHUCKING DIAMETER: 1.26"

SUB-SPINDLE ROTATION SPEED: 200 TO 3000RPM

SUB-SPINDLE MINIMUM INDEXABLE ANGLE: 15 DEGREES

SUB-SPINDLE MOTOR: 2HP

EQUIPPED WITH:

CHIP CONVEYOR

FULL C-AXIS ON MAIN SPINDLE

LIVE TOOLING

SUB-SPINDLE

LNS MINI SPRINT BAR LOADER

5HP HIGH PRESSURE COOLANT PUMP

PART CONVEYOR

TRI-MIST 850 MIST COLLECTOR

MACHINE DIMENSIONS: 9'6" X 5'6" X 5'4"

WEIGHT: 6600 LBS.

WSPT... LRTRI-00000-022924-A

CAT # LRTRI-00000-030324-A

PTWS - 03032024-LR-12

Picture# 03012023

* All information deemed accurate but may vary from model to model.

Contact Larry for any questions please call Four Zero One - Nine Six Five - Five Five Five Seven

___________________________________________________

Equipment Financing Available, please contact us!

Fast Application, it’s all filled in for you...

Online leasing applications (get LOW monthly payments)

* Please Note: Not all machines may qualify for Leasing.

Payments: We accept all Major Credit Cards, Bank Wires, Company and Personal Checks.

SHIPPING: Contact us for great rates on shipping...

We always get better rates...

Please email us for a rigging and shipping quote; just include the zip code when inquiring and if you have a loading dock or ground level with forklift. Thank you!

Contact us at Four Zero One - Nine Six Five - Five Five Five Seven

We also ship worldwide.

CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping dates are only approximate and contingent upon delays beyond our control. All orders received are binding only when they have been accepted and acknowledged by us in writing. Provisions in customer’s purchase orders contrary to these conditions shall not be binding upon us unless accepted in writing. Unless otherwise specified, prices quoted are F.O.B. shipping point, exclusive of State, County and Federal taxes which must be added where applicable. Insurance on shipment must be requested by email, there will be an additional charge for shipping insurance. Shipping destination must be available to receive the shipment… any costs incurred on delays due to the buyers’ destination being unable to receive the shipment and/or additional services required, will be the responsibility of the buyer. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. All used equipment is sold "as is".

INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user's responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. User agrees to indemnify and hold Seller harmless of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agent to follow instructions, warnings, or recommendations furnished by manufacturer, or Seller, or by failure of user to comply with Federal, State and Local laws applicable to such equipment including the Occupational Safety and Health Act of 1970. User shall notify Seller promptly after occurrence of any accident involving these machines and shall cooperate fully with Seller. or Seller's agent in investigating and determining the cause of said accident.