Yoder WH-200 Series Roll Forming System Tube & Pipe Forming Machine Formtek USA with Safety Light Screen

Yoder WH-200 Series Roll Forming System Tube & Pipe Forming Machine Formtek USA with Safety Light Screen

$34,995 (USD)

Attleboro, MA

orCall 1 (401) 965-5557


This is a used Yoder WH-200 Series Roll Forming System with Safety Light Screen in Excellent Condition!

Yoder WH-200 Series Roll Forming Systems

Yoder is one of the few companies in the roll forming industry that can provide equipment for the heavy gauge and high-strength steel markets. Yoder WH-Series Roll Forming Systems offer increased strength capabilities, decreased changeover time and simplified maintenance compared to the W-Series machines that preceded them. Like the Yoder tradition, the WH-Series machines continue to utilize rugged cast housings made in the United States, machined, assembled and tested at their facility in Cleveland, Ohio.

Features of the Yoder WH- 200 Series Roll Forming Systems include:

  • Double Timken Bearings inboard and outboard
  • Outside locknuts for ease of bearing maintenance
  • Splined or square drive shafts for connecting spring loaded universals
  • Ground Spacers for ease of Should alignment
  • Easy On Shafts
  • Slotted outboard housings, coupled with Bolted “C” Washer shafts for ease of tooling changeover
  • “C”-washer end shaft arrangement allows removal of outboard housing without complete removal of shaft bolt.
  • Option of Single Point Adjustment with Digital readouts and Spring loaded coupling for individual adjustment, if required
  • Bolted-In Keys
  • Slotted outboard housing allow removal without fully removing hold-down bolt.
  • Timken tapered roller bearing in both inboard and outboard bearing boxes.
  • Inboard bearing box does NOT need to be dismantled to set bearing pre-load OR to set shoulder alignment.
  • Common bearing seals used on both inboard and outboard bearing boxes.
  • Shaft keys are bolted to the shaft so they will not fall out and get lost.
  • Single-Point Adjustment (SPA) feature available.
  • Common Seals Inboard and Outboard

Sizes and Capacities

WH-150 WH-200 WH-250 WH-300 WH-350

Roll Shaft Diameter (in) 1.5 2 2.5 3 3.5

Roll Shaft Diameter (mm) 38.1 50.8 63.5 76.2 88.9

Tube OD Max. (in) 1.5 3 3.5 4.5 5.5

Tube OD Max. (mm) 38.1 76.2 88.9 114.3 139.7

Tube OD Min. (in) 0.375 0.5 0.625 0.75 0.75

Tube OD Min. (mm) 9.5 12.7 15.9 19.1 19.1

Tube Wall Max. (in) 0.083 0.134 0.188 0.3 0.375

Tube Wall Max. (mm) 2.1 3.4 4.8 7.6 9.5

Tube Wall Min. (in) 0.02 0.02 0.03 0.03 0.03

Tube Wall Min. (mm) 0.5 0.5 0.8 0.8 0.85



WSPT# LRGD-00000-041324-D

Picture 040524

* All information deemed accurate but may vary from model to model.

Contact Larry for any questions you may have... GOOGLE "Larry Razza Machinery"

Contact us at Four Zero One - Nine Six Five - Five Five Five Seven


Equipment Financing Available, please contact us!

Fast Application, it’s all filled in for you...

Online leasing applications (get LOW monthly payments)

* Please Note: Not all machines may qualify for Leasing.

Payments: We accept all Major Credit Cards, Bank Wires, Company and Personal Checks.

SHIPPING: Contact us for great rates on shipping...

We always get better rates...

Please email us for a rigging and shipping quote; just include the zip code when inquiring and if you have a loading dock or ground level with forklift. Thank you!

Contact us at Four Zero One - Nine Six Five - Five Five Five Seven

We also ship worldwide.

CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping dates are only approximate and contingent upon delays beyond our control. All orders received are binding only when they have been accepted and acknowledged by us in writing. Provisions in customer’s purchase orders contrary to these conditions shall not be binding upon us unless accepted in writing. Unless otherwise specified, prices quoted are F.O.B. shipping point, exclusive of State, County and Federal taxes which must be added where applicable. Insurance on shipment must be requested by email, there will be an additional charge for shipping insurance. Shipping destination must be available to receive the shipment… any costs incurred on delays due to the buyers’ destination being unable to receive the shipment and/or additional services required, will be the responsibility of the buyer. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. All used equipment is sold "as is".

INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user's responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. User agrees to indemnify and hold Seller harmless of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agent to follow instructions, warnings, or recommendations furnished by manufacturer, or Seller, or by failure of user to comply with Federal, State and Local laws applicable to such equipment including the Occupational Safety and Health Act of 1970. User shall notify Seller promptly after occurrence of any accident involving these machines, and shall cooperate fully with Seller. or Seller's agent in investigating and determining the cause of said accident.


ManufacturerYoder Formtek
Stock NumberWSPT-LRGD-00000-041324-D