This is a 25 kg/h STAINLESS STEEL SOLVENT RECOVERY & FRACTIONAL

DISTILLATION SYSTEM

Dual-Column Design • PLC Controlled • Built 2020

IDEAL FOR DMSO & SPECIALTY SOLVENT RECOVERY

************** MAKE OFFER – PRICED TO SELL****************

DESCRIPTION

Available for immediate sale is this 25 kg/h stainless steel solvent recovery and fractional distillation system, manufactured in 2020 and offered in excellent, lightly used condition. Originally configured for high-purity DMSO recovery, this system is broadly applicable to a wide range of specialty solvents and fine chemical distillation processes.

The system features a dual-column design, complete stainless steel construction, integrated heat exchangers, vacuum capability, circulation pumps, and a Siemens PLC control system. It was engineered for efficient solvent purification, recovery, and recycling in industrial, pilot-scale, and R&D environments.

This is a turnkey distillation skid representing an exceptional opportunity to acquire a modern solvent recovery system at a fraction of original build cost.

TYPICAL APPLICATIONS

• Solvent recovery and recycling
• DMSO purification
• Specialty solvent processing
• Fine chemical distillation
• API intermediates (non-GMP)
• Pilot plant and scale-up operations
• Contract distillation services

PROCESS OVERVIEW

• Feed rate: Up to 25 kg/h
• Designed product purity: ≥ 99.6 wt%
• Feed supplied as saturated liquid
• Dual-column configuration for dehydration and rectification
• Vacuum-assisted operation for efficient separation

KEY SPECIFICATIONS

• Throughput: Up to 25 kg/h
• Construction: Stainless Steel (SS304)
• Control System: Siemens PLC
• Power Requirement: 8.5 kW
• Electrical: 460V / 60Hz / 3-Phase
• Cooling Water Requirements:
• 17°C @ 1.5 m³/h, 0.3 MPa
• 28°C @ 5.0 m³/h, 0.3 MPa
• Estimated Footprint:
• Approx. 2.2 m x 2.4 m x 4.5 m (7.2 ft x 7.8 ft x 14.8 ft)
• Must be installed on a level surface

SYSTEM INCLUDES

• Dual distillation columns (dehydration & rectification)
• Reboilers and condensers
• Pre-heater and solvent cooler
• Vacuum pumps
• Circulation and transfer pumps
• Complete stainless steel piping and valves
• Siemens PLC automation
• Structural equipment frame
• Insulation system

(Complete equipment list available upon request.)

CONDITION

This system is in excellent overall condition with minimal prior use. Clean, complete, and professionally built. Available for inspection by appointment.

WHY THIS SYSTEM MAKES SENSE

• Built 2020 – modern design
• Turnkey solvent recovery skid
• Broad applicability beyond DMSO
• Ideal for non-GMP, pilot, or industrial use
• Replacement cost typically exceeds $150,000+

ADDITIONAL INFORMATION

• Available for inspection
• Specifications subject to verification
• Sold as-is, where-is

FINANCING

Financing available for qualified buyers.

Fast Application, it’s all filled in for you...

Online leasing applications (get LOW monthly payments)

PAYMENTS

Wire transfer, ACH, company checks, all major credit cards, or approved financing.

SHIPPING & RIGGING

Contact us for excellent shipping and rigging rates.

Please email us with:

• Destination zip code
• Loading dock or forklift availability

We ship worldwide.

Call Four Zero One – Nine Six Five – Five Five Five Seven

PTWS -LCCA-00004-081324-A

R011826

Picture# 081324

* All information deemed accurate but may vary from model to model.

CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping dates are only approximate and contingent upon delays beyond our control. All orders received are binding only when they have been accepted and acknowledged by us in writing. Provisions in customer’s purchase orders contrary to these conditions shall not be binding upon us unless accepted in writing. Unless otherwise specified, prices quoted are F.O.B. shipping point, exclusive of State, County and Federal taxes which must be added where applicable. Insurance on shipment must be requested by email, there will be an additional charge for shipping insurance. Shipping destination must be available to receive the shipment… any costs incurred on delays due to the buyers’ destination being unable to receive the shipment and/or additional services required, will be the responsibility of the buyer. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. All used equipment is sold "as is".

INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user's responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. User agrees to indemnify and hold Seller harmless of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agent to follow instructions, warnings, or recommendations furnished by manufacturer, or Seller, or by failure of user to comply with Federal, State and Local laws applicable to such equipment including the Occupational Safety and Health Act of 1970. User shall notify Seller promptly after occurrence of any accident involving these machines and shall cooperate fully with Seller. or Seller's agent in investigating and determining the cause of said accident.