Cincinnati Sub-Zero CSZ ZP-8-1.5-1-H/AC Environmental Test Chamber

8 cu ft Workspace • Cascade Refrigeration • Touchscreen Control • Tested & Powered

DESCRIPTION

Available for immediate sale is this Cincinnati Sub-Zero (CSZ) Z-Plus Series Environmental Test Chamber, model ZP-8-1.5-1-H/AC, manufactured in the USA and recently powered on and observed in operation.

This chamber features a stainless-steel interior workspace of approximately 8 cubic feet (roughly 24" × 24" × 24"), heavy-duty insulation, forced-air circulation, and cascade refrigeration for low-temperature testing. The integrated touchscreen controller was live at the time of inspection and actively displaying temperature readings.

Cincinnati Sub-Zero chambers are widely used in aerospace, electronics, automotive, defense, EV battery testing, semiconductor qualification, reliability labs, and university research facilities.

This unit is ideal for thermal cycling, environmental stress screening, component validation, burn-in testing, and R&D applications where reliable temperature performance is required.

SPECIFICATIONS

Manufacturer: Cincinnati Sub-Zero (CSZ)

Series: Z-Plus

Model: ZP-8-1.5-1-H/AC

Serial No.: ZP0841801

Interior Volume: Approx. 8 cu ft

Interior Dimensions: Approx. 24" W × 24" D × 24" H

Electrical: 208 Volts / 3-Phase / 60 Hz

Full Load Current: 26 Amps

Maximum Fuse: 35 Amps

Refrigeration: Cascade System

Refrigerants:

– R-404A (5.0 lbs)

– R-508B (1.5 lbs)

Cooling: Air-Cooled Condenser

Construction: Stainless-Steel Interior

Control: Touchscreen HMI

Country of Manufacture: USA

Year of Manufacture: Approx. 2008 (per serial number)

FEATURES

• Z-Plus Series industrial environmental chamber

• Approx. 8 cu ft stainless workspace

• Cascade refrigeration for deep-cold testing

• Forced-air circulation system

• Touchscreen temperature controller

• Air-cooled condenser (no chilled water required)

• Heavy-duty insulated enclosure

• Viewing window

• Access ports

• Mobile base

• Designed for lab and production qualification use

INCLUDES

• Cincinnati Sub-Zero ZP-8 Environmental Chamber

• Integrated refrigeration system

• Touchscreen controller

• Viewing window

• Mobile base

WSPT# LASTR-0000-012426-B

Picture: 012126

CONDITION

This chamber has been powered on and observed operating, with the touchscreen controller active and temperature readings displayed at the time of inspection. No extended temperature-soak or performance certification testing has been performed. Sold as-is, where-is.

SHIPPING

Contact us for great rates on shipping.

We always get better rates.

Please contact us for a rigging and shipping quote; just include the zip code when inquiring and if you have a loading dock or ground level with forklift. Thank you!

Contact us at Four Zero One – Nine Six Five – Five Five Five Seven

We also ship worldwide.

OFFERED BY

L R Associates, Inc.

Machinery Dealers / Consultants / Appraisers / Auctioneers

25 Conduit St., Central Falls, RI 02863

Tel (401) 965-5557 Fax (866) 566-0102

www.larryrazza.com

ADDITIONAL INFORMATION

Photos and video available upon request.

Inspections welcome by appointment.

Specifications subject to verification.

FINANCING

Financing options may be available to qualified buyers. Please inquire for details. LOW Monthly Payments!

PAYMENTS

Wire transfer preferred. All major credit cards and company checks.

CONDITIONS

All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping dates are only approximate and contingent upon delays beyond our control. All orders received are binding only when they have been accepted and acknowledged by us in writing. Provisions in customer’s purchase orders contrary to these conditions shall not be binding upon us unless accepted in writing. Unless otherwise specified, prices quoted are F.O.B. shipping point, exclusive of State, County and Federal taxes which must be added where applicable. Insurance on shipment must be requested by email, there will be an additional charge for shipping insurance. Shipping destination must be available to receive the shipment; any costs incurred on delays due to the buyer’s destination being unable to receive the shipment and/or additional services required will be the responsibility of the buyer. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. All used equipment is sold “as is.”

INDEMNIFICATION

Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user’s responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. User agrees to indemnify and hold Seller harmless of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agent to follow instructions, warnings, or recommendations furnished by manufacturer, or Seller, or by failure of user to comply with Federal, State and Local laws applicable to such equipment including the Occupational Safety and Health Act of 1970. User shall notify Seller promptly after occurrence of any accident involving these machines, and shall cooperate fully with Seller or Seller’s agent in investigating and determining the cause of said accident.