BOREL FI 1250-640 HIGH-TEMPERATURE INDUSTRIAL ELECTRIC CHAMBER FURNACE – 2024 – UNUSED – 1250°C / 2282°F – 52 KW – 480V 3 PHASE – 640 LITER CHAMBER

DESCRIPTION

Available for immediate sale is this Borel FI 1250-640 High-Temperature Industrial Electric Chamber Furnace, manufactured in 2024 and never placed into service.

This is a substantial 52 kW industrial furnace capable of operating at temperatures up to 1250°C / 2282°F, designed for demanding high-temperature thermal processing and heat-treatment applications.

Manufactured by Borel / SOLO Swiss SA of Switzerland, the FI Series is engineered for industrial applications requiring high operating temperatures, robust refractory construction, precise temperature control, and dependable continuous operation.

This particular furnace was purchased new in 2024 for a project that was never implemented. It remains in exceptionally clean, unused condition and represents an excellent opportunity for a buyer requiring a late-model, high-capacity industrial furnace without the expense and lead time associated with ordering a comparable new system.

The furnace features a large approximately 640-liter refractory-lined chamber, heavy-duty exposed resistance heating elements positioned throughout the chamber for efficient heat distribution, substantial high-temperature insulation, and a large cantilever-style insulated door.

The system is powered by 480 Volt / 3 Phase / 60 Hz electrical service with a rated heating capacity of 52 kW.

An integrated electrical control cabinet incorporates a SOLO Swiss digital temperature/process controller, industrial power switching components, disconnects, safety controls, and associated electrical hardware.

The interior refractory, heating elements, control cabinet, wiring, exterior panels, and overall machine show the exceptional condition expected from equipment that has never been placed into production.

Suitable for a broad range of industrial and laboratory high-temperature processes including heat treating, annealing, stress relieving, tempering, preheating, ceramics processing, materials testing, research and development, and other controlled thermal-processing applications.

This is an exceptionally clean 2024 Borel high-temperature furnace offering 1250°C capability, a large processing chamber, 52 kW heating capacity, and unused condition.

SPECIFICATIONS

• Manufacturer: Borel / SOLO Swiss SA
• Model: FI 1250-640
• Type: High-Temperature Industrial Electric Chamber Furnace
• Year: 2024
• Serial Number: 24023
• Condition: UNUSED – Never Placed Into Service
• Maximum Operating Temperature: 1250°C / 2282°F
• Heating Capacity: 52 kW
• Electrical: 480 Volt / 3 Phase / 60 Hz
• Nominal Chamber Capacity: Approximately 640 Liters
• Heating Method: Electric Resistance
• Chamber Construction: Heavy-Duty High-Temperature Refractory Lined
• Control: Digital Temperature / Process Controller
• Door Configuration: Large Cantilever-Style Insulated Door
• Installation: Floor Mounted

APPROXIMATE CHAMBER DIMENSIONS

• 32" Wide
• 42" Deep
• 32" High

APPROXIMATE EXTERIOR DIMENSIONS

• 62" Wide
• 72" Front to Back
• 70" High

IMPORTANT INSTALLATION NOTE:

Due to the cantilever-style upward-opening furnace door, approximately 120" of overhead clearance is required to allow the door to fully open.

FEATURES

• 2024 Manufacture
• UNUSED – Never Placed Into Service
• Maximum Temperature: 1250°C / 2282°F
• 52 kW Heating Capacity
• 480V / 3 Phase / 60 Hz
• Large Approximately 640-Liter Processing Chamber
• Heavy-Duty High-Temperature Refractory Construction
• Multiple Industrial Resistance Heating Elements
• Heating Elements Positioned for Efficient Chamber Heating
• Heavy-Duty Insulated Furnace Door
• Cantilever-Style Door Opening System
• Integrated Electrical Control Cabinet
• SOLO Swiss Digital Temperature / Process Controller
• Industrial Power Contactors and Switching Components
• Main Electrical Disconnect
• Emergency Stop
• Industrial-Grade Electrical Components
• Heavy-Duty Structural Base
• Excellent Overall Cosmetic Condition
• Swiss-Engineered Borel / SOLO Swiss Construction
• Ready for Installation and Commissioning

TYPICAL APPLICATIONS

This high-temperature furnace is suitable for numerous industrial thermal-processing applications including:

• Heat Treating
• Annealing
• Stress Relieving
• Tempering
• Preheating
• Thermal Processing
• Ceramics Processing
• Materials Testing
• Research & Development
• Laboratory Processing
• Metals Processing
• High-Temperature Component Processing
• General Industrial Furnace Applications

Actual suitability for any specific process, atmosphere, material, or production application should be verified by the purchaser.

INCLUDES

• Borel FI 1250-640 High-Temperature Chamber Furnace
• Integrated Electrical Control Cabinet
• SOLO Swiss Digital Temperature / Process Controller
• Main Electrical Disconnect
• Emergency Stop Controls
• Complete Refractory-Lined Furnace Chamber
• Installed Resistance Heating Elements
• Cantilever Door Assembly
• All Components Shown in Photographs

PTWS# LGD-000084-051626-A

Picture# 051226

CONDITION

UNUSED – NEVER PLACED INTO SERVICE

This furnace was purchased new in 2024 for a project that was subsequently cancelled and was never put into production.

The refractory chamber, heating elements, electrical cabinet, controls, wiring, exterior enclosure, and associated components remain exceptionally clean.

This is not a typical used production furnace. It represents an opportunity to purchase a late-model, unused 1250°C industrial furnace at a substantial savings compared with purchasing comparable new equipment.

Please review all photographs for actual condition.

ADDITIONAL INFORMATION

Machine is available for inspection by appointment.

Additional photographs and information are available upon request.

Buyer is welcome to inspect the furnace prior to purchase.

Specifications and dimensions are believed to be accurate but are subject to buyer verification.

FINANCING

Financing available for qualified buyers.

Please contact us for additional information regarding available financing options.

PAYMENTS

Wire transfer, ACH, company checks, certified funds, or approved financing.

SHIPPING & RIGGING

Contact us for great rates on shipping & rigging...

We always get better rates...

Please email us for a rigging and shipping quote; just include the destination zip code when inquiring and let us know if you have a loading dock or ground-level access with forklift.

Thank you!

Contact us at Four Zero One - Nine Six Five - Five Five Five Seven

We also ship worldwide.

CONDITIONS

All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping dates are only approximate and contingent upon delays beyond our control. All orders received are binding only when they have been accepted and acknowledged by us in writing. Provisions in customer's purchase orders contrary to these conditions shall not be binding upon us unless accepted in writing.

Unless otherwise specified, prices quoted are F.O.B. shipping point, exclusive of State, County and Federal taxes which must be added where applicable.

Insurance on shipment must be requested by email; there will be an additional charge for shipping insurance.

Shipping destination must be available to receive the shipment. Any costs incurred due to delays caused by the buyer's destination being unable to receive the shipment and/or additional services required will be the responsibility of the buyer.

Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors.

All used equipment is sold "AS IS".

INDEMNIFICATION

Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user's responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation.

User agrees to indemnify and hold Seller harmless of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agent to follow instructions, warnings, or recommendations furnished by manufacturer, or Seller, or by failure of user to comply with Federal, State and Local laws applicable to such equipment including the Occupational Safety and Health Act of 1970.

User shall notify Seller promptly after occurrence of any accident involving these machines, and shall cooperate fully with Seller or Seller's agent in investigating and determining the cause of said accident.